How do I install and set up my Shelly 1PM Gen4? | NetXL
How do I install and set up my Shelly 1PM Gen4?
Download the Shelly Smart Control App: Install the Shelly Smart Control app on your smartphone or tablet.
Create or Log In to Your Account: Open the app and either create a new Shelly account or log in to your existing one.
Set up your Network: Make sure your phone is connected to the correct WiFi network and Bluetooth is enabled on your phone.
Wire and Power your Shelly 1PM Gen4: Install the relay using the wiring diagram below and turn the power on. Your Shelly will start flashing if it's been powered correctly.
Add the Device to the Shelly App: Press the + symbol in the bottom right corner and select your inclusion method (Bluetooth, WiFi or network scan).
Connect to WiFi: Select your local WiFi network and enter the password when prompted. Once connected successfully, the Shelly relay will stop flashing.
Name and Organise Your Device: Give your Shelly a name, assign it to a room, and complete the setup process.
