UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware.

Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance. Use the UniFi Controller software to quickly configure and administer an enterprise Wi-Fi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

The Ubiquiti UAP-AC-SHD UniFi AP may be installed outdoors under an eave or other protected location. Do not install the UniFi AP in an open environment. The mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling and the cable feed must be pointed downwards when wall-mounted. Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable

The dedicated security radio allows the UniFi SHD AP to scan for security threats, such as malicious frames and rogue access points, while maintaining throughput for client devices. At the same time, UniFi, in conjunction with the UniFi SHD AP, analyses and displays the wireless spectrum and airtime utilisation to allow the network admin to have unprecedented real-time visibility into the spectral and protocol usage in the network.

For help deciding which Ubiquiti Access Point is suitable for you, check out our guide here, and for more information about setting up your Access Point, read our FAQ!

UAP-AC-SHD Key Highlights

• Dedicated security radio
• Weatherproof designs allows the unit to be used outside when under eaves or other protected areas
• 4x4 MIMO technology on both 2.4 and 5 GHz bands
• Newly designed UniFi Controller optimises RF Performance

What's in the Box?

• UniFi UAP-AC-SHD Access Point
• Mounting plate
• Ceiling backing plate
• 4 x Ceiling screws
• 4 x Keps nuts
• 2 x T-bar mounts
• 2 x T-bar screws
• Allen Wrench
• 4 x Wall screw
4 x screw anchors
• Release tool
• Cable feed plug
• Gigabit PoE (48V, 0.5A) with Mount Bracket
• Quick Start Guide