Ubiquiti UniFi UAP-AC-HD Simultaneous MU-MIMO WiFi PoE Access Point

UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware.

Easily accessible through any standard web browser, the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance. Use the UniFi Controller software to quickly configure and administer an enterprise Wi-Fi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

The Ubiquiti UAP-AC-HD UniFi AP may be installed outdoors under an eave or other protected location. Do not install the UniFi AP in an open environment. The mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling and the cable feed must be pointed downwards when wall-mounted. Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable

For help deciding which Ubiquiti Access Point is suitable for you, check out our guide here, and for more information about setting up your Access Point, read our FAQ!